TNA Connect Data Sheet

Overview

Dimensions (L x W x H)	Built-in: 156 x 90 x 40 mm Standalone: 180 x 115 x 45 mm
Weight	Built-in: 100 g Standalone: 300 g
Operating temperature range	-10 ... +55 °C
Operating voltage	7 – 28 VDC, typ. 300mA @ 12V
Power consumption
	@ 12V	Average: 230mA Maximum: 300mA
	@ 20V	Average: 130mA Maximum: 190mA
	@ 24V	Average: 120mA Maximum: 170mA
	@ 28V	Average: 100mA Maximum: 140mA
System	Embedded Linux
Warranty	2 Years

Connections

Inputs	10 x Digital Inputs (open/close)
Outputs	4 x Digital/MOSFETS Outputs 28VDC / 2A (to GND)
Power Supply	7 – 28 VDC via screw-type terminals ≈ 300mA @ 12 VDC 5 VDC via Micro-USB port ≈ 700mA @ 5VDC
Ethernet	RJ45 connector (shielded) Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
Mobile	mPCIe modem (2G/3G/4G)
Antenna	SMA connector
Serial	Receives serial data from different devices Interface Type RS-232
USB	4 x USB 2.0

warning

Power over Ethernet (PoE) is not supported on TNA devices. Attempts to connect a PoE cable to the device may damage it.

Accessories

Dial Converter Module	To receive alarms via analog phone line (PSTN to IP, Contact ID, and SIA)
Serial Adapter	To receive serial data from different devices Supported interface types: RS-232, RS-422, and RS-485
Ethernet Adapter	To add another Ethernet interface
Wi-Fi Client Adapter	To connect to a local Wi-Fi for alarm transmission
Wi-Fi Access Point Adapter	To connect to the TNA via Wi-Fi
4G Modem	To add a backup path to the Ethernet connection
Antenna	To ensure stable mobile connectivity Available antenna lengths: 5m, 15m, and 30m