TNA Connect V2 Data Sheet

Overview
Dimensions (L x W x H) | Built-in: 162 x 95 x 34 mm Standalone: 180 x 100 x 45 mm | |
Weight | Built-in: 110 g Standalone: 250 g | |
Operating temperature range | -20 ... +80 °C | |
Operating voltage | 7 – 36 VDC, typ. 300mA @ 12V | |
Power consumption | ||
@ 12V | Average: 150mA Maximum: 220mA | |
@ 24V | Average: 80mA Maximum: 140mA | |
@ 28V | Average: 70mA Maximum: 120mA | |
@ 36V | Average: 50mA Maximum: 100mA | |
System | Embedded Linux | |
Warranty | 2 Years |
Connections
Inputs | 10 x Digital Inputs (open/close) |
Outputs | 4 x Digital/MOSFETS Outputs 30VDC / 2A (to GND) |
Power Supply | 7 – 36 VDC via screw-type terminals ≈ 300mA @ 12 VDC |
Ethernet | RJ45 connector (shielded) Gigabit Ethernet |
Mobile | mPCIe modem (2G/3G/4G) |
Antenna | SMA connector |
Serial | Receives serial data from different devices Interface Type RS-232 |
USB | 4 x USB 2.0 |
Accessories
Dial Converter Module | To receive alarms via analog phone line (PSTN to IP, Contact ID, and SIA) |
Serial Adapter | To receive serial data from different devices Supported interface types: RS-232, RS-422, and RS-485 |
Ethernet Adapter | To add another Ethernet interface |
Wi-Fi Client Adapter | To connect to a local Wi-Fi for alarm transmission |
Wi-Fi Access Point Adapter | To connect to the TNA via Wi-Fi |
4G Modem | To add a backup path to the Ethernet connection |
Antenna | To ensure stable mobile connectivity Available antenna lengths: 5m, 15m, and 30m |