Skip to main content
Share:
Link is copied

Configure Mobile

Configure Mobile

The Mobile network interface functions as a backup to the Ethernet interface or can serve as the primary interface when the TNA is configured with a single path setting. It is also used to connect to evalink talos.

To configure it, navigate to settings_ethernet Networks > signal_cellular_alt Mobile on the TNA Web Server.

On the Configuration tab, you can view the following information under Status:

  • Model: The model of the modem inserted into the TNA

  • IMEI: The International Mobile Equipment Identity number

  • Technology: The generation used for mobile communications - 2G, 3G, or 4G

  • Signal Level: The signal strength of the mobile connection

  • State: The state of the mobile connectivity

info

Access level 3 or above is required for APN configuration.

Ensure that the SIM card does not have any active PIN code. If necessary, deactivate it using a mobile phone.

In most cases, the required Access Point parameters are automatically set. If not, do the following under APN Configuration:

  1. Enter the Access Point Name under AP Name

  2. If applicable, enter the login and password in the corresponding fields

  3. Click Save

  4. (Optional) Click Reset to reset the values in all fields

Under SIM, you can also view the following information about the used SIM card:

  • State: The state of the SIM card

  • ICCID: The Integrated Circuit Card Identification Number of the SIM card

  • MCC: The Mobile Country Code

  • MNC: The Mobile Network Code

info

Access level 3 or above is required to enter additional parameters.

If you need to change the MCC and MNC values, under Additional Parameters, do the following:

  1. Enter the new MCC and MNC values in the corresponding fields

  2. Click Save

  3. (Optional) Click Reset to reset the values in all fields

Connection Status

The connection status tab is used to check the status of your mobile connection by going through 6 checklist steps:

Step
Name
States
1
Modem StatusIn progress: Powering up the modem...
Failed: Failed to power on the modem
Success: The modem is powered on
2
SIM card presenceIn progress: Checking SIM card presence...
Failed: No SIM card detected
Success: SIM card is present
3
SIM card PINIn progress: Checking PIN...
Failed: SIM card requires a PIN code
Success: SIM card doesn't have a PIN code
4
Network registrationIn progress: Registering on the network...
Failed: Failed to register on the network
Success: Registered on the network
5
IP parametersIn progress: Receiving IP parameters...
Failed: Failed to receive IP parameters
Success: IP parameters received
6
Connection to evalinkIn progress: Connecting to evalink...
Failed: Failed to establish connection to evalink
Success: Connection established

Was this page helpful?