Configure Wi-Fi
TNA devices can connect to nearby 2.4 GHz Wi-Fi networks using Wi-Fi Adapters to establish connectivity towards evalink talos. The Wi-Fi interface serves as an alternative in case no Ethernet connection is available.
To configure Wi-Fi, ensure you have access level 3 or higher and connect a Wi-Fi adapter to your TNA device.
To view the list of available networks and configure connection parameters, navigate to
Networks > Wi-Fi on the TNA Web Server.To connect to one of the listed networks or a custom network, follow these steps:
-
Select the network to which you want to connect from the list of Available Networks
-
If the network requires a password, enter it under Network Parameters in the corresponding field
-
(Optional) If you need to connect to a custom network, manually enter the SSID and Password in the specified fields
-
(Optional) If you require a custom IP configuration, click on IP Settings and fill in the necessary parameters:
- IP address
- Subnet mask
- Gateway
- DNS server 1
- DNS server 2 (Optional)
- DNS server 3 (Optional)
Click on Save.
-
Click Start Wi-Fi to initiate the connection
A check icon
will appear next to the network name once the connection is established.
To connect to a different network, first click on Stop Wi-Fi, then follow the same steps for the new network.