Skip to main content
Share:
Link is copied

Virtual Receivers and Major Supported Panels

The table below lists the virtual receivers in evalink talos that power alarm transmitter integrations.

Typically, a virtual receiver has the same name on the global level and on the site level, with a prefix virtual added on the global level, but there are exceptions, consider the table below.

For information about the connection monitoring schemes available in evalink talos, see section Connection Monitoring Overview > Connection Monitoring Schemes in article Connection Monitoring Reference.

On Company > IntegrationsOn Sites > [site] > IntegrationsIntegrations / DevicesConnection monitoring schemeNetwork protocol used
Virtual TNA ReceiverTNA ReceiveripTNA4i, TNA Connect transmittersDirect (SLA)TCP
Virtual Vanderbilt SPC ReceiverFlexC ReceiverVanderbilt panelsDirect (SLA)TCP
Virtual DC09 ReceiverDc09 ReceiverAjax, Jablotron, Risco, AddSecure, TAS, etc.Direct (SLA)TCP or UDP
Virtual VdS ReceiverVdS ReceiverTelenot, Daitem, ABI Security Systems, etc.Direct (SLA)TCP
Virtual Frontel GI ReceiverFrontel GI ReceiverVideofiedIndirect (Frontel GI)TCP
Virtual Fibro ReceiverFibro ReceiverFibroDirect (SLA)UDP
Generic Surgard ReceiverSurgard ReceiverA variety of panels / protocolsIndirect (Sur-Gard)TCP
Virtual ALWON ReceiverAlwon ReceiverALWONDirect (SLA)TCP
Farwest IP Receiver
(ex-Virtual Osiris Receiver)
Farwest IP ReceiverA variety of panels / protocolsIndirect (Sur-Gard)TCP
Farwest VoIP Receiver
(ex-Virtual MyVoice Receiver)
Farwest VoIP ReceiverA variety of devices sending alarms via analog connectionsIndirect (Sur-Gard)TCP
Virtual GALAXY ReceiverGalaxy ReceiverHoneywellDirect (SLA)TCP
Virtual INTELBRAS ReceiverIntelbras ReceiverIntelbrasDirect (SLA)TCP
Virtual Paradox ReceiverParadox ReceiverParadoxDirect (SLA)UDP
Share:
Link is copied

Was this page helpful?